Supported Peripherals

Check whether your device runs with Caldera !

PrintersCutters Spectrophotometers

Caldera supports a long list of cutters through direct access (VisualCut for Roll cutters) or via a controller (GrandCut for Flatbed cutters).GrandCut supports various file formats and derivatives :

  • CalderaXML (XML format created by Caldera and widely implemented in the field)
  • HPGL
  • DXF
  • SVG
  • Zünd Cut Center (ZCC)
  • iScript 1.0 (old MGE ICut)
  • iScript 2.0 + JDF

The information here is indicative and non exhaustive and you should ask first your cutter reseller for the file format or software used to know if it is supported by Caldera.

You are a Caldera user? Download drivers WorkSpace

Caldera partner or reseller? Go to WorkSpace

Aristo Supported since version : Category : Comment : top
Aristo flatbed cutters 7.11 GrandCut
Blackman and White Supported since version : Category : Comment : top
All tables 11.0 GrandCut TigerVision Controller
Colex Supported since version : Category : Comment : top
Sharpcut 10.2 GrandCut
Comagrav Supported since version : Category : Comment : top
All tables 10.1 GrandCut
Darrel Supported since version : Category : Comment : top
Darrel 9.2 GrandCut
DGS Supported since version : Category : Comment : top
Generic 9.2 GrandCut For all models.
Duncan Supported since version : Category : Comment : top
Duncan flatbed cutters 7.22 GrandCut
Dyss Supported since version : Category : Comment : top
X5 10.1 GrandCut DXF
X7 10.1 GrandCut DXF
X9 10.1 GrandCut DXF
Elitron Supported since version : Category : Comment : top
All tables 10.0 GrandCut
EuroSystems Supported since version : Category : Comment : top
OptiSCOUT 7.2 GrandCut
GCC Supported since version : Category : Comment : top
Bengal 8.01 VisualCut
Expert 24 8.01 VisualCut
Expert 24 LX 8.01 VisualCut
Expert Pro 8.01 VisualCut
Jaguar 7.57 VisualCut
Puma 7.57 VisualCut
Puma III 8.01 VisualCut
RX 9.1 VisualCut
Sable 8.01 VisualCut
Generic Supported since version : Category : Comment : top
Generic DXF 9.2 GrandCut
HPGL 10.2 GrandCut
I-script compatible cutters 7.57 GrandCut
Gerber Supported since version : Category : Comment : top
M-1200 8.01 GrandCut 7 marks support from 9.10 (recent controller software only)
M-3000 8.01 GrandCut 7 marks support from 9.10 (recent controller software only)
Grafitroniks Supported since version : Category : Comment : top
GTK 7.2 GrandCut
Graphtec Supported since version : Category : Comment : top
CE3000-120 7.0 VisualCut
CE3000-60 7.0 VisualCut
CE3000Mk2-120 7.0 VisualCut
CE3000Mk2-60 7.0 VisualCut
CE6000 9.2 VisualCut
FC2250 11.1 VisualCut
FC5100-100 7.0 VisualCut
FC5100-130 7.0 VisualCut
FC5100-75 7.0 VisualCut
FC7000 Mk2-100 7.22 VisualCut
FC7000 Mk2-130 7.22 VisualCut
FC7000 Mk2-160 7.22 VisualCut
FC7000 Mk2-75 7.22 VisualCut
FC7000-100 7.0 VisualCut
FC7000-130 7.0 VisualCut
FC7000-160 7.0 VisualCut
FC7000-75 7.0 VisualCut
FC8000 7.55 VisualCut Network interface supported from 9.10
FC8600 9.2 VisualCut
Harmuth Supported since version : Category : Comment : top
All tables 9.2 GrandCut DXF
HP Supported since version : Category : Comment : top
Latex 54 Cutter 11.1 VisualCut
Latex 64 Cutter 11.1 VisualCut
iECHO Supported since version : Category : Comment : top
All 11.0 GrandCut CalderaXML
Jingwei Supported since version : Category : Comment : top
All tables 10.0 GrandCut
Esko-Kongsberg Supported since version : Category : Comment : top
i-cut Prorudction Console 11.0 GrandCut i-script 2.0 + JDF
i-cut Vision 7.1 GrandCut i-script 1.0
XPAuto 10.2 GrandCut DXF
Flip Side Reader 12.0 GrandCut
Matic Supported since version : Category : Comment : top
Matic 9.2 GrandCut
MCT Supported since version : Category : Comment : top
TigerVision 11.0 GrandCut
MGE ICut Supported since version : Category : Comment : top
IScript (Level 5) 7.1 GrandCut
Mimaki Supported since version : Category : Comment : top
CG-130 EX 7.0.1 VisualCut
CG-130 FX 7.0.1 VisualCut
CG-160 EX 7.0.1 VisualCut
CG-160 FX 7.0.1 VisualCut
CG-75 EX 7.0.1 VisualCut
CG-75 FX 7.0.1 VisualCut
CG-SRI 9.2 VisualCut
CG-SRII 9.2 VisualCut
CG-SRIII 9.2 VisualCut
CJV150 10.2 VisualCut
CJV300 10.2 VisualCut
Multicam Supported since version : Category : Comment : top
Multicam flatbed cutters 7.2 GrandCut
Mutoh Supported since version : Category : Comment : top
Kona 8.0 VisualCut USB not supported on macOS since V10. Not supported in V12.
SC-Pro 7.55 VisualCut USB not supported on macOS since V10
Ultima SC-1400 D 7.0 VisualCut USB not supported on macOS since V10. Not supported in V12.
Ultima SC-850 D 7.0 VisualCut USB not supported on macOS since V10. Not supported in V12.
ValueCut 9.2 VisualCut
Opticam Supported since version : Category : Comment : top
All tables 10.2 GrandCut DXF
Protek Supported since version : Category : Comment : top
All tables 10.1 GrandCut
Roland Supported since version : Category : Comment : top
CAMM-1 GR 11.1 VisualCut
CammJet CJ-540 7.0 VisualCut
GS-24 10.2 VisualCut
GX-300 7.22 VisualCut
GX-400 7.22 VisualCut
GX-500 7.22 VisualCut
GX-640 7.22 VisualCut
SolJet SP-540 7.0 VisualCut
SolJet SP-540EX 7.0 VisualCut
SolJet SP-545EX 7.0 VisualCut
VersaCAMM SP-300 V 7.0 VisualCut
VersaCAMM SP-540 V 7.0 VisualCut
Scodix Supported since version : Category : Comment : top
Scodix 9.2 GrandCut
Summa Supported since version : Category : Comment : top
F Series Pro 9.0 GrandCut With OptiSCOUT software controller (GrandCut) or SummaFlex with version 10.1 and higher.
S series 120 D 7.0.1 VisualCut
S series 120 T 7.0.1 VisualCut Does NOT support OPOS-CAM directly, use File mode and the Windows/MacOS controller. Other modes supported directly.
S series 160 D 7.0.1 VisualCut
S series 160 T 7.0.1 VisualCut Does NOT support OPOS-CAM directly, use File mode and the Windows/MacOS controller. Other modes supported directly.
S series 75 D 7.0.1 VisualCut
S series 75 T 7.0.1 VisualCut Does NOT support OPOS-CAM directly, use File mode and the Windows/MacOS controller. Other modes supported directly.
S2 series 9.2 VisualCut Does NOT support OPOS-CAM directly, use File mode and the Windows/MacOS controller. Other modes supported directly.
SummaCut D 120 SE 7.0.1 VisualCut
SummaCut D 60 SE 7.0.1 VisualCut
SummaCut D 140 FX 11.2 VisualCut Summa S2 PostNet
SummaFlex 10.1 GrandCut
SummaSign Pro SL D 7.0.1 VisualCut
SummaSign Pro SL T 7.0.1 VisualCut
Tekcel Supported since version : Category : Comment : top
Opticam 9.2 GrandCut
Valiani Supported since version : Category : Comment : top
Geminus 11.1 GrandCut Crop Marks not supported with non-vacuum cutters versions
Maximus 11.1 GrandCut Crop Marks not supported with non-vacuum cutters versions
Optima 11.1 GrandCut Crop Marks not supported with non-vacuum cutters versions
Ultra 11.1 GrandCut Crop Marks not supported with non-vacuum cutters versions
VHF Supported since version : Category : Comment : top
All tables 10.2 GrandCut
Zund Supported since version : Category : Comment : top
Zund & Caldera Sensor 7.1 VisualCut
Zund Cut Center 8.0 GrandCut
Zund Touch & Cut 7.57 GrandCut