You are a caldera user ? Download drivers on the usernet.
Caldera partner or reseller ? Go to the extranet.
Aristo Duncan EuroSystems GCC Generic Gerber Grafitroniks Graphtec MGE ICut Mimaki Multicam Mutoh Roland Summa Zund
| Aristo | Supported since version : | Comment : |
|
| Aristo flatbed cutters | 7.11 |
| Duncan | Supported since version : | Comment : |
|
| Duncan flatbed cutters | 7.22 |
| EuroSystems | Supported since version : | Comment : |
|
| OptiSCOUT | 7.20 |
| GCC | Supported since version : | Comment : |
|
| Bengal | 8.01 | ||
| Expert 24 | 8.01 | ||
| Expert 24 LX | 8.01 | ||
| Expert Pro | 8.01 | ||
| Jaguar | 7.57 | ||
| Puma | 7.57 | ||
| Puma III | 8.01 | ||
| RX | 9.10 | ||
| Sable | 8.01 |
| Generic | Supported since version : | Comment : |
|
| I-script compatible cutters | 7.57 |
| Gerber | Supported since version : | Comment : |
|
| M-1200 | 8.01 | 7 marks support from 9.10 (recent controller software only) | |
| M-3000 | 8.01 | 7 marks support from 9.10 (recent controller software only) |
| Grafitroniks | Supported since version : | Comment : |
|
| GTK | 7.20 |
| MGE ICut | Supported since version : | Comment : |
|
| IScript (Level 5) | 7.10 |
| Mimaki | Supported since version : | Comment : |
|
| CG-{75,130,160} EX | 7.0.1 | ||
| CG-{75,130,160} FX | 7.0.1 |
| Multicam | Supported since version : | Comment : |
|
| Multicam flatbed cutters | 7.20 |
| Mutoh | Supported since version : | Comment : |
|
| Kona | 8.00 | ||
| SC-Pro | 7.55 | ||
| Ultima SC-{850,1400} D | 7.0 |
| Roland | Supported since version : | Comment : |
|
| CammJet CJ-540 | 7.0 | ||
| GX-{300,400,500} | 7.22 | ||
| SolJet SP-{540, 540EX, 545EX} | 7.0 | ||
| VersaCAMM SP-{300,540} V | 7.0 |
| Zund | Supported since version : | Comment : |
|
| Zund & Caldera Sensor | 7.10 | ||
| Zund Cut Center | 8.00 | ||
| Zund Touch & Cut | 7.57 |
