This document lists the most important fixed issues in Patch900-Misc-2. The patch Misc #2 includes all fixes published in Patch900-Misc-1 (listed at the end of the document).Some of the fixes could have been published in separate patches after the release of Patch900-Misc-1.

Enhancements

• Easymedia: Support for Barbieri SpectroPad and Caldera ColorPad (OEM version)
• New Pantone libraries (Pantone+ 336 New)
• Easymedia: Added the characterization dataset FOGRA39L.
• ColorBook: New button to open the color book in the image bar after creation. Displaying texts in the preview is now disabled by default because of performance issues. It can be enabled if needed. Modifed some default values according to the most common uses.
• Print: Print only if scale is 100% option can now be confgured to any scale value.
• Image and Application bars can have now up to 100 tabs.
• The maximum (displayable) number of pages in a PS/PDF fle was previously 9999 (in the print window) and 255 (in the Spooler). Both limits have been removed.
• EasyMedia : Print parameters are now synchronized in all wizard steps. Before, the values were specifc to each step.
• Summa cutters now support fle generation (for usage with OPOS).
• Compose: custom ruler display for users of the Durst Omega1

Bug fxes

• Print : Chinese customers can now print annotations and texts in crop marks (fle name and date) correctly. All chinese symbols were printed as squares before.
• Print : Quicksets created for Step&Repeat with more than one page with a multipage fle were causing single page fles to be printed with as many copies as the number of pages confgured in the quickset.
• Print : Fixed missing parameters when reopening jobs issued from workfows. Could affect the following parameters : cutting, Nest-O-Ba, spot, additional inks (white, varnish…)
• Print : Fixed missing lines (white areas) when printing multiple copies of an image assembled manually in Compose in some conditions.
• Print : Fixed printing unicode characters in the annotations and text crop marks (fle name, date). Affected mainly chinese language which had all symbols printed as squares.
• Print : Rendering of PDF gradations with APPE was not as a smooth as it was supposed to be.
• Some stair-case effects could be seen compared to APPE/V8 and GhostScript.
• Nest-O-Matik : Fixed issue with jobs not being fnalized when needed (ie. when printing on sheets)
• Nest-O-Matik : Fixed deleting source fles too early when distributed into several Autonest jobs when printing from a hotfolder with « delete after print » option enabled. Only the frst Autonest job was printed correctly, the others being empty.
• Spot Colors : Spot color type (embedded/additional) was not saved/restored with Load/Save and Embed in/Extract from Image.
• Cut:Fixed detection problem with Mimaki cutters in USB.
• EasyMedia : Fixed « Bad value 27 » error when creating profles with UCR or no black.
• EasyMedia : Changing the Quality of the media project inside the profling wizard was causing all the media parameters to be reset to the default values of the base media.
• EasyMedia : With HP DJ L2x500 printers, the generic media parameters were reset every time the user opened the parameter edition window. The parameters specifc to a profle were not affected.
• Spooler : Fixed missing destination fle for all grand drivers. The feld was always reading « Printer ».
• LiveSpooler : Fixed incorrect colors of ink in the Spooler, when connected to a swissQprint printer.
• Hotfolders : The fles were always opened with APPE even when the Ghostscript was asked. Warning, on launch the interface is always reverted to APPE.
• Hotfolders : Sometimes multipage fles would not be deleted from the hotfolder after being printed.
• InkPerformer : Fixed issue with jobs blocked in « Optimizing Printer Profle… » state.
• Fileman : Some opened TIFF fles with specifc orientation tags were wrongly mirrored.
• HP Designjet L26500/L28500 : When using the Dual Side Printing, if the user cancelled all the jobs, the printer was stuck in DSP mode and required a restart to work in the normal mode.
• VisualCut : Roland SP cutter has the blade offset limits fxed. It can now be set up to 1500 (= 1.5mm) instead of only 150 (= 0.15mm)
• VisualCut : Gerber cutter now has bigger registration marks (1/2” instead of 1/4”)

Enhancements in Patch900-Misc-1

• ColorBook: Added a preview.
• ColorBook: Improved automatic layout. It is now possible to have one-page roll mode. Swatch packs are now organized differently to cover the whole width.
• LiveSpooler: Ink consumption reported from printers is now displayed in spooler.
• EasyMedia: Added possibility to export profles and confgurations for EasyTextile.

Bug fxes in Patch900-Misc-1

• Print: Fixed crashes when changing printer specifc setting with old Roland and Mimaki drivers. The error “One of the printing modules died” error was displayed.
• Print: Fixed the problem with connection some Epson USB printers on Mac. The printer was not detected.
• Print: Multi-page PDF fles with pages of different sizes were not printed correctly.
• Print: Fixed “unsupported input format in xCMMTranslateColors” error when printing some PDF fles in RGB.
• QuickConfg: Fixed crash when a confguration name in print client was containing some specifc characters.
• QuickConfg: White ink parameters were not saved nor restored correctly.
• Mutoh: Printer specifc parameters were not saved and were restored to defaults when print client was opened
• ReopenJob: When reopened, jobs originating from a workfow had the printer specifc parameters all set to wrong values.
• Nest-O-Matik: Centered print option was not working when printing without color bars.
• Spooler: Reopening a job and opening VisualCut interface were not working if the spooler was opened from the desktop icon and not from the application bar.
• InkPerformer: Option “Rip/Print twice and compute saving” was not working properly with images having over 60 characters in the name. Saved ink percentage was not displayed in spooler.
• Easymedia: Fixed crash when using an EyeOne in densitometer mode.
• Easymedia: It is now possible to load correction curves in N-color modes. Open Correction Curves was grayed.
• Fileman: When using PDF boxes other than “Media”, opened fles were having cut contours shifted and scaled incorrectly.
• APPE: Loaded PDF fles could have some strange artifacts in the cut contours.
• Cut: Fixed ZCC mis-placed registration marks.
• Cut: Fixed using ZCC cutfles after upgrading to V9.
• Workfow: Fixed “AppliQuit: Appli not found” message when closing a print client during workfow setup on Mac.
• Tiling+: Changing shape of grommets from square to circle was not working.
• Compose: Dropping multiple copies of an image (Ctrl + drop) was flling only selected templates that were placed below the point of the drop. Now it flls also templates that are higher.